news

How can the spiral chute be used? Overview The gravity beneficiation spiral chute is a combination of the characteristics of the spiral concentrator, spiral concentrator, shaking table, and centrifuges for beneficiation. After the Ministry of Metallurgical Industry organized relevant scientific research, design, universities, concentrators, and other units to carry out appraisal, it is believed that this kind of equipment has superior performance, progress in separation indicators, and has won the scientific and technological research achievement award of the Ministry of Metallurgical Industry. Now it has been widely used in non-ferrous and Ferrous metals. This machine is suitable for separating fine materials with a particle size of 0.3-0.02 mm to obtain iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon sand, Rutile ore, monazite ore, phosphate rock, tungsten ore, cassiterite, tantalum, niobium ore and other non-ferrous metal ores, rare metals and non-metallic ore bodies with different density and specific gravity. 2、 Apply skills to make the FRP chute stand up, calibrate the vertical line, fix the iron frame or wood at the appropriate position, and let the sand ore be sent to the two ore inlets on the spiral top by the mortar pump. Add make-up water to mobilize the density of the mineral slurry. The mineral slurry naturally swirls from top to bottom. There is a coherent centrifugal force in the rotating slope flow speed, which is different in density, specific gravity, Granularity and shape of the mineral sand, After the gravity and centrifugal force of the swirling flow, the ore and sand are separated, and the selected ore enters the concentrate hopper and is piped out. The tailings flow into the tailings hopper and are piped to the sand pit, and then discharged by a sand pump, completing the entire beneficiation process. Spiral chutes can be used at a rate of 1 3. Features: Fiberglass reinforced plastic chutes have attracted special attention among various gravity concentrators due to their low power consumption, simple structure, small footprint, easy operation, stable beneficiation, clear separation, no need for moving parts, convenient maintenance and management, and high output per unit area. The machinery has a relatively wide and stable groove surface, and the mineral mortar exhibits a large area of laminar flow, making it more suitable for processing medium to fine (-4mm) sized ores. We have made spiral chutes with diameters of 400, 600, 900, and 1200 millimeters domestically, Ф The processing capacity of 1200MM four head is about 4-6 T/H. Can a spiral chute be used? 4. The structure of a fiberglass spiral chute consists of six parts: a feeding homogenizer, a feeding chute, a rotating groove, an equipment acquisition groove, a product gathering hopper, and a groove bracket (including a cross or triangular frame). The spiral groove formed by connecting the rotating blades is a key component. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together by bolts. The sorting surface of the rotating groove has a pre made durable and wear-resistant layer. He also has the advantages of lightweight, sturdy, and long-lasting durability in consumer goods. The head of the spiral groove is equipped with a multi tube feeding homogenizer for ore dressing, which is also easy to operate. The ore separator is freely placed on the cross (or tripod) on the support table. The evenly distributed mortar is slowly fed onto the surface of the spiral groove through the feeding groove installed at the beginning of the rotating groove, and the selection is carried out. The bottom of the rotating groove is installed in a valve block type new product cutting groove, and the sorted new products are divided into three categories (or four types) of new equipment along the radial direction according to grade. Change the selection width of each new product by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that allows the obtained multi head ore flow to be gathered and exported separately. The transverse plane of the spiral chute and the different slopes of the curves are very suitable for the selection of small particle mineral materials. Can spiral chutes be used? 5. Scope of use: Fiberglass spiral chutes are suitable for processing 0.6-0.03 millimeters or vein ores and minerals, but high mud content is unfavorable for sorting. At present, it has been widely used for processing iron ore, tungsten, tin ore sand, tantalum niobium, coastal and river placers, and placer gold mines. Can the spiral chute be used