Jiangxi Small Spiral Chute Quotation 1. Equipment Introduction: A gravity separation machine for mineral mortar that uses inertial centrifugal force in rotary spiral motion to achieve lightweight and heavy mineral sorting. 2、 Use skills to set up the FRP spiral chute, calibrate the vertical line, use an iron frame or wood to set the proper position, send the mineral sand to the two ore inlets above the spiral by the sand pump, add makeup water, and adjust the density of the mineral mortar. The mineral slurry naturally swirls from high to low, and a continuous centrifugal force occurs in the flow speed of the swirling inclined surface to obtain the difference in gravity, Granularity and shape of the mineral sand, By achieving the effects of gravity and centrifugal force through swirling flow, the ore is separated, and the selected ore is discharged into the concentrate hopper and connected out through pipelines. The tailings are discharged into the tailings hopper and connected to the sand tank through pipelines, and then discharged by a mortar pump, completing the entire beneficiation process. Jiangxi small spiral chute quotation 
III. Features or advantages 1. Major type, strong processing capacity, and the objective condition of today's mineral aggregate processing is to use large-scale to create income. 2. Fine granulation: for the treatment of fine and micro particle minerals, especially the treatment of ore materials with Granularity of -0.047MM, the original equipment can basically ensure the recovery of+0.047mm particle size. 3. With the development of Hydraulics, two-phase flow and machine vibration, the spiral concentrator has developed from a simple use of gravity and water resistance to a composite application of centrifugal force, equipment vibration force, magnetic separation force, etc. By using a composite force field, more useful minerals are enriched and the separation of fine particles from these fine particles increases the ore recovery rate. 4. Based on energy saving, environmental protection and consumption reduction, the area and space occupied should be small, and the water and electricity consumption should be small. 5. The operation is simple and flexible, the sorting process is stable, the structure is simple and simple, and it is convenient for maintenance management. Quotation for Jiangxi Small Spiral Chute: 4. Structural Composition: The fiberglass chute consists of six parts: a feeding distributor, a feeding trough, a rotating trough, an equipment acquisition trough, a product gathering hopper, or a trough bracket (including a cross or triangular frame). The spiral groove formed by connecting spiral pieces is the main component. The rotating plate is made of fiberglass (fiberglass reinforced coal gangue), which is connected together through screws. The selected surface of the rotating groove has a pre designed durable anti wear layer. It also has the advantages of lightweight, sturdy, and long-lasting consumer goods. The head of the spiral groove is equipped with a multi tube feeding homogenizer for screening ore, which is simple to operate. The mineral separator does not need to be restricted to placing on a cross (or tripod) on a support table. The evenly distributed slurry is slowly fed onto the spiral groove surface through a feeding chute installed at the head end of the rotating groove, and sorting is carried out. The bottom of the rotating groove is installed in a valve block type new product cutting groove, and the selected new equipment is divided into three (or four) types of new products according to grade along the radial direction. Change the width of each new product by adjusting the position of the valve block. The new equipment gathering bucket is a concentric annular tube that allows the selected variable ore flows to be densely exported. The transverse surface of the fiberglass spiral chute and the slope of the curve change, which is particularly suitable for the separation of small particle mineral materials. Quotation of Jiangxi Small Spiral Chutes V. Scope of Application Spiral chutes are suitable for separating fine grained iron ore, ilmenite ore, chromite ore, pyrite, sand tin, tantalum niobium ore, placer gold, coal, monazite, Rutile, zircon ore, rare earth ore and other metal and non-metallic mineral materials with sufficient specific gravity difference. Quotation for Jiangxi Small Spiral Chutes @ @ 000
