news

Spiral chute specification parameters: Spiral chute specification parameters: 1. Introduction: The chute selection belongs to the slope flow selection process. Mineral mortar is fed to a partially inclined chute or inclined surface, and with the assistance of water, the mineral particle group becomes loose and layered. The upper layer of light minerals quickly exits the outside of the chute, while the lower layer of heavy minerals stays inside the chute or flows out at low speed from the bottom. After differentiation, the selected ore or tailings are obtained. Spiral chutes are machinery for mining and mineral processing, making them particularly ideal for mining sand deposits in bays, rivers, sandbanks, and streams. The equipment has the characteristics of correct structure, simple installation, small footprint, easy operation, stable beneficiation, clear mineral separation, large processing capacity, high efficiency beneficiation and enrichment ratio, high recovery and utilization rate, and reliable operation. It has the advantages of small weight, moisture prevention, rust prevention, corrosion resistance, and strong adaptability to the fluctuation of feed volume, density, Granularity, and grade. 2、 The working principle is that the ore slurry is slowly fed onto the rotating groove surface through the feeding chute installed at the beginning of the spiral groove, and sorting is carried out. The tail end of the spiral groove is equipped with a valve block type product acquisition groove, and the selected equipment is divided into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each product, the equipment gathering hopper enables the selected multi-directional mineral flow to be densely led out. The transverse surface of the fiberglass chute has different slopes, which is very suitable for the separation of fine mineral particles. Spiral chute specification parameters III. Features This equipment is suitable for separating iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphate ore, tungsten ore sand, tin, tantalum niobium ore, tantalum niobium ore or other non-ferrous gold ores, rare ore metals and non-metallic minerals with gravity difference. This machine also has advantages such as stable selection process, easy operation, wide range of allowable changes in feed density, high enrichment, high recovery rate, small footprint, low water consumption, simple structure, no need for power, large processing capacity, easy installation, easy operation, low investment, and quick effectiveness. Specification parameter 4 of the spiral chute. The structure of the fiberglass spiral chute consists of six parts: a feeding homogenizer, a feeding chute, a spiral groove, an equipment cutting groove, a product gathering hopper, and a support bracket (including a cross or triangular frame). The rotating groove connected by spiral blades is a key component. The rotating plate is made of fiberglass (fiber reinforced coal gangue) and connected together by bolts. The spiral groove has a pre made wear-resistant layer on the selected surface. He also has the advantage of lightweight, sturdy, and long-lasting consumables. The rotary groove is equipped with a multi tube ore feeding homogenizer to screen minerals, which is easy to control. The mineral separator does not need to be placed on a cross (or tripod) on a support table. The mineral mortar with an average score is slowly fed onto the surface of the rotating groove through a feeding chute installed at the head of the spiral groove for sorting. The bottom of the spiral groove is installed in a valve block type new product cutting groove, and the selected new equipment will be divided into three (or four) types of new products along the radial direction according to grade. Change the selection width of each new product by adjusting the orientation of the valve block. The new equipment gathering bucket is a concentric circular tube that allows the obtained multi-directional mineral flow to be differentiated, gathered, and led out. The transverse plane of the spiral chute and the slope change of the curve are extremely suitable for the sorting of fine-grained materials. 5、 The application range of fiberglass chute is 0.6-0.03mm for processing vein ore and ore sand, but it is unfavorable for sorting when the mud content is high. Nowadays, it has been widely used in the treatment of iron, tungsten, sand tin, tantalum niobium, coastal and riverbed mineral sand and sand gold. Spiral chute beneficiation equipment Gravity beneficiation chute beneficiation chute equipment Spiral chute Spiral chute specification parameters