news

Spiral Chute Spiral Chute 1. Explanation: The spiral concentrator combines the characteristics of spiral chutes, gravity spiral chutes, shakers, and centrifugal gravity concentrators. After relevant scientific research organized by the Ministry of Metallurgical Industry, design, universities, and other departments of this beneficiation company, it has been recognized as having excellent performance, advanced sorting objectives, and has won the Science and Technology Research Achievement Award from the Ministry of Metallurgical Industry. It has now been recognized as a non ferrous metal Ferrous mines are widely used. This equipment is applicable to sorting iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phengite, tungsten ore, tin, tantalite, niobium and other nonferrous metal, rare metal and nonferrous metal ore bodies with different density and specific gravity. 2、 The uniform mortar is slowly fed onto the rotating groove surface through the feeding chute installed at the head of the spiral groove for selection. The tail of the spiral groove is equipped with a valve type product acquisition groove, which divides the sorting equipment into three categories according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each equipment, the product gathering hopper enables the selected multi head ore flow to be densely led out. The transverse section of the fiberglass chute has a change in the slope of the curve, which is particularly suitable for the selection of fine-grained materials. Spiral chute III. Highlight or characteristic 1: Extremely high efficiency, high recovery rate, and accurate beneficiation; 2. No power required; 3. Lightweight, rust resistant, durable, wear-resistant, and corrosion-resistant; 4. Low cost operation, long service life; 5. Strong adaptability to fluctuation of feed volume, density, Granularity and grade; The friction force on the surface of 6 diamond sand makes the beneficiation efficiency better than other plastic surfaces. Spiral Chute 4. The structure of the fiberglass spiral chute is composed of a feeding device, a cross (tripod), a feeding chute, a spiral chute, a receiving chute, a gathering bucket, and a trough support. 5、 Use This product is used to separate fine materials with a particle size of 0.3-0.02mm to obtain iron ore, ilmenite ore, chromite ore, pyrite ore, zircon sand, Rutile ore, monazite ore, phosphorus ethylene, tungsten ore, placer tin, tantalum, niobium ore or other non-ferrous metal ores, rare metals and non-metallic ore bodies with different density and specific gravity. spiral chute