The grooved spiral chute 1. Explanation: The spiral concentrator summarizes the characteristics of spiral concentrators, spiral concentrators, shakers, and centrifugal gold concentrators. After being evaluated by relevant scientific research, design, universities, and beneficiation enterprises organized by the Ministry of Metallurgy, it is believed that this type of mechanical performance is excellent, the sorting indicators are advanced, and it has won the Science and Technology Research Achievement Award of the Ministry of Metallurgical Industry. It has been widely used in non-ferrous and black mining metals. This machine is suitable for separating small materials with Granularity of 0.3-0.02mm to obtain iron, ferrotitanium ore, chromite ore, pyrite ore, zircon sand, Rutile ore, monazite ore, phosphorus, tungsten ore, cassiterite, tantalum niobium, niobium and other non-ferrous metal ore, rare mineral gold or non-metallic mineral body with gravity difference. 2、 Use skills to set up the FRP spiral chute, calibrate the vertical line, use an iron frame or wood to set the proper position, send the mineral sand to the two ore inlets above the spiral by the sand pump, add makeup water, and adjust the density of the mineral mortar. The mineral slurry naturally swirls from high to low, and a continuous centrifugal force occurs in the flow speed of the swirling inclined surface to obtain the difference in gravity, Granularity and shape of the mineral sand, By achieving the effects of gravity and centrifugal force through swirling flow, the ore is separated, and the selected ore is discharged into the concentrate hopper and connected out through pipelines. The tailings are discharged into the tailings hopper and connected to the sand tank through pipelines, and then discharged by a mortar pump, completing the entire beneficiation process. 3. Features: 1. Stable sorting process and easy control. 2. Wide range of allowable changes in feed density. 3. Ultra high enrichment ratio and high recovery probability. 4. Small occupation area and low water consumption. 5. Simple structure without power. 6. Strong processing capacity. 7. Simple installation and easy operation. 8. Small investment and quick effect The feeding chute, spiral groove, product selection groove, equipment gathering hopper, and groove bracket (including cross or triangular frame) are composed of six parts. The rotating groove formed by connecting rotating discs is a key component. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together by bolts. The sorting surface of the spiral groove has a pre designed durable wear-resistant layer. He also has the advantages of lightweight, sturdy, durable and durable consumables. A multi tube feeding homogenizer is installed above the rotating groove to screen the ore evenly, making it easy to control. The ore separator is not limited to being placed on the cross (or tripod) of the support table. The evenly distributed mortar is slowly fed onto the surface of the rotating groove by the feeding groove installed at the head of the spiral groove for sorting. The tail of the spiral groove is installed in a valve type new equipment to obtain the groove, allowing the sorted new products to be divided into three categories (or four categories) along the radial direction according to the grade of the new equipment. Change the cutting width of each new product by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that densely leads out the selected multi head ore flow. The horizontal plane of the spiral concentrator, with a change in the slope of the curve, is particularly suitable for the separation of fine particle materials. The machine is suitable for separating iron ore, ilmenite, Chromite, pyrite, zircon sand, Rutile, monazite, phosphate, tungsten ore sand, tin ore, tantalum niobium ore, niobium ore and other non-ferrous metal ores, rare metals and non-metallic ore bodies with specific gravity differences. 
grooved spiral chute
