What equipment is used for spiral chutes? 1. Overview: Chute sorting belongs to the inclined flow sorting process. The mortar is fed to some inclined grooves or slopes, and with the assistance of water flow, the mineral particles become loose and layered. The upper layer of light minerals are quickly discharged outside the groove, while the lower layer of heavy minerals are retained inside the groove or slowly discharged from the lower part. After each is collected, the selected ore and tailings can be obtained. The fiberglass spiral chute is a mining and beneficiation machine, making it ideal for mining and beneficiation of mineral sand on beaches, river beds, sand banks, and streams. The product has the characteristics of correct structure, simple installation, small footprint, simple operation, stable beneficiation, clear mineral separation, high processing yield, high efficiency, high beneficiation enrichment ratio, high recovery rate, and reliable operation. It has the advantages of light weight, moisture prevention, rust prevention, durability and corrosion resistance, and strong adaptability to fluctuations in feed volume, density, Granularity and grade. 2、 Working principle: The fiberglass chute separator is freely placed on the cross (or tripod) of the support table. Equal mortar is slowly fed onto the surface of the rotating groove through the feeding chute installed at the end of the spiral groove head, and sorting is carried out. The tail end is equipped with a valve block type product acquisition tank, which divides the selected equipment into three types (or four types) according to grade along the radial direction. Change the cutting width of each product by adjusting the orientation of the valve block. The equipment gathering bucket is a concentric circular tube that allows the selected variable ore flows to converge and export separately. The transverse plane of the fiberglass spiral chute has different slopes, which is very suitable for the separation of fine ore particles. What equipment is used for spiral chutes? Advantages or features: 1. High efficiency, high recovery rate, and accurate mineral sorting; 2. Do not use power; 3. Small weight, anti rust, durable and anti wear, durable and anti corrosion; Low cost and long service life; 5 pairs of strong applicability for fluctuations in feed volume, density, particle size, and grade; The frictional force formed on the surface of 6 diamond sand makes the beneficiation effect better than other plastic surfaces. What equipment is used for a 
spiral chute? 4. The structure of a fiberglass chute is composed of a feeding device, a cross (tripod), a feeding groove, a rotating groove, a receiving groove, a gathering bucket, and a groove support. What equipment does the spiral chute use? 5. Scope of use: FRP chute is suitable for separating fine grained iron ore, ilmenite ore, chromite ore, pyrite ore, tin, tantalum niobium ore, placer gold ore, coal mine, monazite ore, Rutile ore, zircon, rare earth ore, and has enough Density contrast to obtain other metal and non-metallic ores. What equipment is used for the 
spiral chute
