Phone number for purchasing spiral chutes: 1. Describe the beneficiation chute including the slope flow sorting process. The mortar is fed to some inclined grooves or slopes, and with the help of flowing water, the mineral particle group is not tight and layered. The lighter mineral material on the upper part is quickly discharged to the outside of the groove, while the heavy mineral on the lower layer is retained in the groove or discharged from the bottom at low speed. After receiving the difference, the selected ore or tailings can be obtained. Fiberglass spiral chutes are machinery for mining and beneficiation, especially ideal for sand mining in bays, rivers, sandbanks, and streams. The product also has the characteristics of appropriate structure, simple installation, small footprint, simple operation, stable beneficiation, clear mineral separation, high yield, high efficiency beneficiation and enrichment ratio, high recovery and utilization rate, and reliable operation. It has the advantages of light weight, moisture prevention, rust prevention, durability and corrosion resistance, and strong applicability to the fluctuation of feed volume, density, Granularity, and grade. 2、 Technical principle: The fiberglass spiral chute mineral separator is not limited to stacking on the cross (or tripod) of the support table. The average mineral mortar is slowly fed onto the spiral groove surface through a feeding groove installed at the end of the rotating groove head for sorting. The tail is equipped with a valve type product selection slot, which divides the selection equipment into three types (or four types) according to grade along the radial direction. Change the cutting width of each product by adjusting the orientation of the valve block. The equipment gathering bucket is a concentric circular tube that allows the obtained multi head ore flow to gather and lead out. The cross section of the spiral chute is particularly suitable for the selection of fine ore particles due to changes in the slope of the curve. The phone number for buying spiral chutes is 
III. Advantages and characteristics: 1. High efficiency, high recovery rate, and accurate ore sorting; 2. No power required; 3. Lightweight, rust proof, durable, wear-resistant, and corrosion-resistant; 4. Low cost operation, long service life; 5. It is applicable to the fluctuation of feed volume, density, Granularity and grade; The frictional force formed on the surface of 6 diamond sand makes the beneficiation efficiency better than other plastic surfaces. The phone number for purchasing spiral chutes at 
. 4. Classification: According to the particle size of the processed ore, chutes can be divided into three types: (1) Coarse grained spiral chutes, with a maximum particle size of 2-3mm or more for ore feeding, and a maximum of 100-200mm. (2) Sand ore chute, processing 2-3MM particle grade ore. (3) Slurry spiral chute, feeding Granularity<0.074mm. Telephone 5 for purchasing spiral chutes. This machine is suitable for sorting iron ore, ilmenite, Chromite, pyrite, zircon sand, Rutile, monazite, phosphate, tungsten ore sand, tin ore, tantalum niobium ore, niobium ore and other non-ferrous metal ore, rare metal and non-metallic ore bodies with specific gravity differences. Phone number for purchasing spiral chutes @ @ 000
