news

Jiangxi Mineral Processing Spiral Chute Plant 1. Explanation: Due to its low environmental pollution and low cost, gravity separation is widely used in mineral processing of metal or non-ferrous metal ores. Spiral chute is one of the gravity beneficiation machinery, with a structural characteristic of a cubic parabolic shape on the cross-section, suitable for handling finer particle sizes of -0.2mm. During the beneficiation process, do not add water for flushing, and divide the end of the chute into sections to obtain fine, medium, and tailings. 2、 The technical principle is the same: the mortar is slowly fed to the rotating groove surface through a feeding groove installed on the spiral groove head for sorting. The tail end of the spiral groove is equipped with a valve block type product cutting groove, which divides the selected equipment into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the acquisition width of each product, the equipment gathering hopper allows the selected multi head ore flow to be differentiated and aggregated for export. The cross section of the spiral concentrator has different slopes, which is particularly suitable for the separation of small particle ore materials. Jiangxi Dressing Spiral Chute Plant III. Features This machine is suitable for separating fine materials with Granularity of 0.3-0.02MM to obtain iron ore, Ilmenite, ferrochrome, ferrosulfide, zircon ore, Rutile ore, monazite ore, phosphate ore, tungsten ore, tin ore, tantalum niobium ore, tantalum niobium ore or other non-ferrous metals, rare ore metals and non nonferrous metal mineral bodies with density weight differences. This machine also has the advantages of stable sorting process, simple control, wide range of allowable changes in ore concentration, high enrichment ratio, high recovery probability, small area occupation, low water consumption, simple structure, no power required, strong processing capacity, simple installation, simple operation, low investment, and quick effectiveness. Jiangxi Mineral Processing Spiral Chute Factory 4. Structural Composition: Spiral chutes are composed of feeding homogenizers, crosses (tripods), feeding chutes, spiral chutes, intercepting chutes, gathering buckets, and trough pillars. Jiangxi Mineral Processing Spiral Chute Factory V. The utilization range of spiral chutes is suitable for processing 0.6-0.03mm and vein ore or ore sand, but it is unfavorable for sorting when the mud content is high. Nowadays, it has been widely used in the processing of iron, tungsten, tin ore, niobium tantalum ore, beach and river sand mines, as well as sand gold mines. Jiangxi Mineral Processing Spiral Chute Factory