news

Spiral chute factory 1. Overview of chute sorting, including the steps of inclined flow sorting. Mortar is provided in some inclined grooves or inclined surfaces. With the assistance of flowing water, the mineral particle group is not tightened and layered. The lighter mineral material on the upper part is quickly discharged out of the groove, while the heavy mineral on the lower layer is trapped in the groove or flows out at a low speed from the lower part. After being distinguished and connected, concentrate and tailings can be obtained. Glass fiber reinforced plastic chutes are equipment for mining and beneficiation, especially ideal for mineral mining and beneficiation at seaside, riverbank, sand bank, and creek banks. The product also features appropriate structure, simple installation, small footprint, easy operation, stable beneficiation, clear separation of ore, high processing yield, high efficiency, high beneficiation enrichment ratio, high recovery rate, and reliable operation. It has the advantages of light weight, moisture-proof, rust proof, durable and anti-corrosion, and strong applicability to the fluctuation of feed volume or density, Granularity, and grade. 2、 Production principle: The screening device of the spiral concentrator is not limited to being placed on the cross (or tripod) of the support table. The average ore slurry is slowly fed to the surface of the rotating groove through the feeding groove installed at the end of the spiral groove head for sorting. The tail end is equipped with a valve block type equipment cutting groove, allowing the sorted products to be divided into three (or four) categories radially according to grade. Change the selection width of each device by adjusting the position of the valve block. The product gathering bucket is a concentric circular tube that gathers and exports the obtained variable mineral flows. The transverse plane of the spiral chute and the slope of the curve vary greatly, making it suitable for the separation of small particle mineral materials. Spiral chute factory III. Features and advantages: 1. Large scale and strong processing capacity. Currently, mineral material processing requires large-scale establishment of profits. 2. Fine granulation refers to the treatment of fine-grained mineral materials, and the treatment of minerals with a particle size of -0.047mm. The original machinery was generally able to ensure the recovery of+0.047mm particle size. 3. With the development of Hydraulics, two-phase flow, machine vibration, etc., spiral chutes have developed from simple use of gravity and flow resistance to composite application of centrifugal force, equipment vibration force, magnetic force, etc. By using a composite force field, the enrichment of useful mineral materials and the separation of fine particles and micro particles can be enhanced, thereby improving the mineral recovery rate. 4. Based on saving energy consumption, reducing energy consumption and environmental protection, the land area and space occupied should be small, and water and electricity consumption should be small. 5. Convenient and flexible operation, stable sorting process, simple structure and convenient Computerized maintenance management system. spiral chute plant IV. According to the particle size of processed mineral materials, the chute can be divided into three types: (1) coarse spiral chute. The maximum Granularity of ore feeding is more than 2-3 mm, and the maximum can be 100-200 mm. (2) Sand ore chute, processing 2-3mm Granularity mineral aggregate. (3) Slurry chute, feeding particle size less than 0.074 millimeters. Spiral chute plant V. Application This product is used to separate fine materials with a particle size of 0.3-0.02mm to obtain iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon sand, Rutile ore, monazite ore, phosphorus ethyl, tungsten ore, placer tin, tantalum, niobium ore or other non-ferrous metal ores, rare metals and non-metallic ore bodies with different density and specific gravity. Spiral Chute Factory