New Type Spiral Chute 1. Overview: Gravity beneficiation spiral chutes summarize the characteristics of gravity beneficiation spiral chutes, gravity beneficiation spiral chutes, shakers, and gold concentrators. After being evaluated and approved by relevant scientific research, design, universities, and beneficiation plants organized by the Ministry of Metallurgy, they are considered to have superior mechanical performance, advanced sorting indicators, and have won the Science and Technology Research Achievement Award from the Ministry of Metallurgical Industry. They are now in the field of non-ferrous metals Ferrous is used in great quantities. This machine is suitable for separating iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphate ethylene, tungsten sand, sand tin, tantalum, tantalum niobium and other nonferrous metals, rare metals and non nonferrous gold mineral bodies with gravity difference from fine materials with Granularity of 0.3-0.02 mm. 2、 Production principle: The spiral mineral separator is not limited to placing on the cross (or tripod) of the support table. The uniform slurry is slowly fed to the rotating groove surface through the feeding groove installed at the head of the spiral groove for sorting. A valve type product selection slot is installed at the tail, allowing the selection equipment to be divided into three (or four) categories according to grade along the radial direction. Adjust the orientation of the valve block to obtain the width of each device. The product gathering bucket is a concentric circular tube that distinguishes and densely draws out the intercepted multi-directional mineral flow. The transverse surface of the fiberglass spiral chute and the slope change of the curve are particularly suitable for the selection of fine particle materials. New spiral chute III. Advantages and features: 1. Stable, easy to control, and with a large density range. 2. The material production and processing yield is large, the enrichment ratio is high, and the recovery rate is high. 3. Small area occupation, low water consumption, simple structure, and no need for power. 4. It is simple and easy to operate, with minimal investment and fast returns. new spiral chute IV. According to the size of ore processed, the chute can be divided into three types: (1) coarse spiral chute. The maximum Granularity of ore feeding is more than 2-3 mm, and the maximum can reach 100-200 mm. (2) The sand ore chute is used to handle 2-3MM particle grade ore materials. (3) Slurry chute, feeding particle size less than 0.074 millimeters. New spiral chute V. Applicable This machine is suitable for separating iron ore, Ilmenite, chromite, pyrite, zircon sand, Rutile, monazite, phosgenite, tungsten, sand tin, tantalite, tantalum niobium or other nonferrous metals, rare ore metals or nonferrous metal minerals with different density and specific gravity from fine and small materials with Granularity of 0.3-0.02MM. New spiral chute