The complete set of equipment for spiral chute PP plate accessories 1. It indicates that gravity beneficiation is widely used in the beneficiation of metal or non-ferrous metal mines due to its low pollution and low cost. The spiral concentrator is one of the gravity separation machines, characterized by a cubic parabola shaped cross-section, suitable for processing finer particle sizes of -0.2 millimeters. In the sorting process, no flushing water is required, and the tailings are obtained by dividing them into sections at the tail end of the tank. 2、 The production principle is that the evenly proportioned mortar is slowly fed onto the rotating groove surface by the feeding groove at the beginning of the spiral groove, and is selected. The tail end of the spiral groove is equipped with a valve block type equipment to cut the groove, allowing the sorted products to be divided into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the selection width of each equipment, the product gathering hopper will merge and export the obtained multi head ore flow differently. The transverse plane and curve slope of the fiberglass spiral chute are different, especially suitable for the selection of small particle materials. Spiral chute PP board accessories complete equipment 3. Features 1. Stable selection process and easy operation 2. Wide range of allowable changes in feed density 3. High enrichment ratio and high recycling rate 4. Small land area and low water consumption 5. Simple structure without power 6. Large processing output 7. Easy installation and easy operation 8. Small investment and quick results Spiral chute PP board accessories complete equipment 4 According to the particle size of the processed ore material, the chute can be divided into three types: (1) Coarse grain chute, with a maximum particle size of 2-3mm or more for ore feeding, and a maximum of 100-200mm. (2) The ore sand chute is used to handle 2-3mm sized ore materials. (3) Slurry chute, feeding Granularity is less than 0.074MM. The complete set of equipment for spiral chute pp plate accessories V. Purpose This machine is suitable for sorting iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon ore, Rutile, monazite, phosphate ore, tungsten ore, tin, tantalum niobium, niobium with a particle size of 0.3-0.02mm and other non-ferrous metal ores, rare metals and non-metallic ore bodies with different density and specific gravity. Spiral Chute PP Plate Accessories Complete Equipment