Wholesale of Original Spiral Chutes 1. Explanation: Chute selection includes the process of inclined surface flow selection. The slurry is fed to a inclined chute or slope, and under the assistance of water, the mineral particle group is loose and layered. The light minerals in the upper layer are quickly discharged from the groove, while the heavy mineral materials in the lower layer stay in the groove or are discharged from the bottom at low speed. After each is connected, fine beneficiation or tailings can be obtained. Spiral chutes are equipment for mining and beneficiation, especially ideal for sand mining along coasts, rivers, sandbanks, and streams. The product has the characteristics of appropriate structure, easy installation, small footprint, easy operation, stable beneficiation, clear mineral separation, high yield, high efficiency beneficiation enrichment ratio, high recovery rate, and reliable operation. It has the advantages of small weight, moisture-proof, rust proof, not easy to corrode, and strong applicability to the fluctuation of feed volume, density, Granularity, and grade. 2、 The production principle is that the evenly proportioned mortar is slowly fed onto the rotating groove surface by the feeding groove at the beginning of the spiral groove, and is selected. The tail end of the spiral groove is equipped with a valve block type equipment to cut the groove, allowing the sorted products to be divided into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the selection width of each equipment, the product gathering hopper will merge and export the obtained multi head ore flow differently. The transverse plane and curve slope of the fiberglass spiral chute are different, especially suitable for the selection of small particle materials. Wholesale of Original Spiral Chutes: III. Features and Advantages: 1. Heavy-duty, high production capacity. In principle, contemporary mineral processing requires the creation of benefits through economies of scale. 2. Fine granulation, the treatment of fine and micro particle grade mineral aggregate is the treatment of minerals with a particle size of -0.047MM. The original equipment can basically ensure the recovery of+0.047mm Granularity. 3. With the development of Hydraulics, two-phase flow, equipment vibration, etc., GRP spiral chute has developed from simple application of gravity and water blocking force to composite application of centrifugal force, equipment vibration force, magnetic separation force, etc. By using a composite force field, the enrichment of suitable mineral materials and the separation of small or fine particles can be increased, thereby improving the mineral recovery rate. 4. With energy saving and environmental protection as the fundamental starting point, the land area and space occupied should be small, and the water and electricity consumption should be small. 5. Convenient and flexible operation, stable sorting steps, simple structure, and convenient Computerized maintenance management system. Original spiral chutes Wholesale 4. The chutes can be divided into three types according to the Granularity of the processed ore materials: (1) Coarse spiral chutes. The maximum particle size of the feed is more than 2-3mm, and the maximum can be 100-200mm. (2) Sand ore chute, processing 2-3 mm Granularity mineral aggregate. (3) Slime spiral chute, feeding Granularity<0.074MM. Wholesale of Original Spiral Chutes 5. The use of spiral chutes is suitable for processing 0.6-0.03MM and this vein of ore and sand, but it is not conducive to sorting when the mud content is high. It has now been widely used in the processing of iron, tungsten, tin ore, niobium tantalum ore, beach and riverbed placer or gold ore, and so on. Wholesale of original spiral chutes