news

When to use spiral chutes? 1. Overview: Chute sorting belongs to the inclined flow sorting process. The mortar is fed to some inclined grooves or slopes, and with the assistance of water flow, the mineral particles become loose and layered. The upper layer of light minerals are quickly discharged outside the groove, while the lower layer of heavy minerals are retained inside the groove or slowly discharged from the lower part. After each is collected, the selected ore and tailings can be obtained. The fiberglass spiral chute is a mining and beneficiation machine, making it ideal for mining and beneficiation of mineral sand on beaches, river beds, sand banks, and streams. The product has the characteristics of correct structure, simple installation, small footprint, simple operation, stable beneficiation, clear mineral separation, high processing yield, high efficiency, high beneficiation enrichment ratio, high recovery rate, and reliable operation. It has the advantages of light weight, moisture prevention, rust prevention, durability and corrosion resistance, and strong adaptability to fluctuations in feed volume, density, Granularity and grade. 2、 Use a method to make the fiberglass chute stand up, align it with the vertical line, use an iron frame or wood to stabilize it in a suitable direction, and use a sand pump to send the ore sand to the top two inlet ports of the spiral. The ore sand slurry enters to increase water and adjust its density. The mineral slurry naturally swirls from top to bottom, and an inertial centrifugal force occurs in the rotating inclined flow rate, resulting in differences in gravity, particle size, and shape of the sand ore, By separating the ore from the sand through the influence of the gravity and centrifugal force of the swirling flow, the concentrate enters the beneficiation hopper and is piped out. The tailings enter the tailings hopper and are piped to the sand tank, which is then discharged by a mortar pump, completing the entire beneficiation process. When to use the spiral chute 3. Advantages and characteristics: 1. Extremely high efficiency, high recycling rate, and precise beneficiation; 2. No power required; 3. Lightweight, rust proof, durable, wear-resistant, and corrosion-resistant; 4. Low cost operation, long service life; 5 strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade; The frictional force on the surface of 6 diamond sand makes the beneficiation effect better than other plastic surfaces. When will the spiral chute be used at ? 4. Structural composition: The fiberglass spiral chute is composed of a feeding homogenizer, a cross (tripod), a feeding chute, a spiral groove, a receiving groove, a gathering bucket, and a groove pillar. When to use spiral chute V. Purpose This product is suitable for separating iron, ferrotitanium, chromite, pyrite, zircon, Rutile, monazite, phosphorus, tungsten, tin placer, tantalum niobium ore, niobium from fine materials with a particle size of 0.3-0.02mm, and has a specific gravity difference from other non-ferrous metal ores, rare ore metals or non-metallic minerals. When will the spiral chute be used at