Spiral Chute Work Video 1: Equipment Description: A gravity separation machine used for separating light and heavy minerals through the continuous centrifugal force generated by mineral mortar in spiral motion. 2、 The mineral mortar with the same technical principle is slowly fed to the surface of the spiral groove through the feeding groove installed at the end of the rotating groove head, and then selected for operation. The bottom of the rotating groove is equipped with a valve block type equipment selection groove, which divides the sorted products into three categories according to grade along the radial direction. By adjusting the position of the valve block to change the acquisition width of each device, the product gathering hopper allows the intercepted variable mineral flow to be converged and exported separately. The transverse plane of the fiberglass spiral chute is particularly suitable for the separation of fine ore materials when the slope of the curve changes. Spiral chute work video III. Features and advantages: 1. Major industrialization and high production capacity. Nowadays, the overall requirement for processing mineral materials is to establish profits on a large scale. 2. Fine granulation: for the treatment of fine particle grade mineral aggregate, especially for the treatment of minerals with the particle size of -0.047mm, the original machine can basically ensure the recovery of+0.047mm Granularity. 3. With the development of Hydraulics, two-phase flow, mechanical vibration, etc., GRP chutes have developed from simple gravity and water blocking force to combined centrifugal force, equipment vibration force, magnetic separation force, etc. By using a composite force field, the enrichment of suitable mineral materials and the separation of fine particles and micro particles are enhanced, thereby improving mineral recovery rate. 4. The basic starting point is to save energy consumption, reduce energy consumption and protect the environment. The area and space occupied should be small, and the water and electricity consumption should be small. 5. Simple and flexible operation, stable sorting process, simple structure, convenient for Computerized maintenance management system. Working video of spiral chute IV. According to the Granularity of ore materials processed, the chute can be divided into three categories: (1) Coarse spiral chute. The maximum particle size of feeding is more than 2-3mm, and the maximum can reach 100-200mm. (2) Mineral sand chute, processing 2-3 millimeter sized ore. (3) Slime spiral chute, feeding Granularity<0.074mm. Spiral chute work video 5. Scope of application: The spiral concentrator is suitable for processing 0.6-0.03mm and vein ore and this ore sand, but it is unfavorable for separation when the mud content is high. At present, it has been widely used for processing iron ore sand, tungsten, tin ore, tantalum niobium, coastal and riverside ore sand, and placer gold. Spiral Chute Work Video