news

Spiral Chute Technical Parameters 1. Product Introduction: A gravity beneficiation equipment that utilizes the inertial centrifugal force that occurs during the spiral rotation movement of mineral slurry to separate light and heavy mineral materials. 2、 Production principle: The spiral chute mineral separator does not need to be restricted from being stacked on the cross (or tripod) of the support table. The evenly proportioned mortar is slowly fed onto the surface of the spiral groove through the feeding groove installed at the end of the rotating groove head for selection. The tail is equipped with a valve type equipment selection tank, which divides the sorted products into three types (or four categories) according to grade along the radial direction. Change the cutting width of each device by adjusting the position of the valve block. The product gathering bucket is a concentric circular tube that allows for the dense export of the obtained variable mineral flow differentiation. The transverse plane of the fiberglass spiral chute has different slopes, which is very suitable for the separation of fine mineral particles. Technical parameters of spiral chute III. Features This machine is applicable to the separation of fine and small materials with a particle size of 0.3-0.02mm to obtain iron ore, ferrotitanium ore, chromite ore, pyrite, zircon, Rutile ore, monazite ore, phosphate ore, tungsten ore sand, tin, tantalum niobium ore, niobium and other non-ferrous metal ores, rare ore metals or non-metallic mineral bodies with density and specific gravity differences. This product has the advantages of stable and simple selection process, wide range of ore concentration tolerance, high enrichment ratio, high recovery probability, small land area occupation, low water consumption, simple structure, no power, large processing capacity, simplified installation, simple operation, small investment, and quick results. Technical parameters of spiral chute IV. The chute can be divided into three categories according to the Granularity of the processed mineral materials: (1) coarse particle spiral chute. The maximum particle size of ore feeding is more than 2-3mm, and the maximum can be 100-200mm. (2) The sand ore chute is used to handle 2-3MM sized ores. (3) Slurry chute, feeding Granularity is less than 0.074mm. Technical parameters of spiral chute V. Application field: FRP spiral chute is suitable for separating fine-grained iron, ferrotitanium, ferrochrome, ferrosulfur, sand tin, tantalum niobium, placer gold, coal, monazite, Rutile, zircon sand, rare earth and other metal and nonferrous metal minerals with completely sufficient specific gravity difference. Technical parameters of spiral chute