news

Jiangxi Experimental Steel Spiral Chute Quotation 1. Introduce the beneficiation chute, including the inclined flow sorting process. Mineral mortar is applied to a partially inclined chute or inclined surface. With the assistance of flowing water, the mineral particle group is not tightly fastened and layered. The upper part of the light mineral material quickly flows out of the groove, while the lower part of the heavy mineral material stagnates in the inner groove or slowly flows out from the lower part. After distinguishing and connecting, the concentrate and tailings can be obtained. Spiral chutes are machinery for mining and beneficiation, especially ideal for sand mining in coastal areas, riverbanks, sandbanks, and streams. The product also has the characteristics of reasonable structure, simple installation, small land occupation, simple operation, stable beneficiation, clear screening of ore, large production capacity, high efficiency, high beneficiation enrichment ratio, high recovery probability, and stable operation. It has the advantages of light weight, moisture prevention, rust prevention, strong corrosion resistance, and strong applicability to feed volume and density, Granularity, and grade fluctuation. 2、 The working principle of the spiral mineral separator is that the mineral separator is freely placed on the cross (or tripod) of the support table. The same slurry is slowly fed onto the spiral groove surface of the feeding groove installed on the rotating groove head for sorting. The tail end is equipped with a valve block type product cutting groove, allowing the sorting equipment to be divided into three (or four) types according to grade along the radial direction. Change the acquisition width of each product by adjusting the orientation of the valve block. The equipment gathering bucket is a concentric circular tube that distinguishes and aggregates the selected multi-directional mineral flow. The transverse surface of the fiberglass chute has a slope change that is extremely suitable for the selection of fine-grained materials. Jiangxi Experimental Steel Spiral Chute Quotation III. Features and Advantages 1. Large scale, strong processing capacity, and objective conditions for mineral processing today are to create benefits through large-scale production. 2. Fine granulation: for the treatment of fine and micro particle grade minerals, especially the treatment of ore materials with a particle size of -0.047 mm, the original machine can generally ensure the recovery of+0.047 mm Granularity. 3. With the development of Hydraulics, two-phase flow, machine vibration, etc., GRP spiral chute has developed from simple use of gravity and water blocking force to composite centrifugal force, equipment vibration force, magnetic separation force, etc. Through a composite force field, the enrichment of useful minerals and the separation of fine and fine particles are increased, thereby increasing the recovery rate of ore materials. 4. With energy saving and environmental protection as the basic starting point, the area and space occupied should be small, and the water and electricity consumption should be small. 5. Convenient and flexible operation, stable sorting steps, simple structure and convenient Computerized maintenance management system. Quotation for Jiangxi Experimental Steel Spiral Chute at 4. The structure of the fiberglass spiral chute is composed of six parts: a feeding homogenizer, a feeding chute, a spiral groove, a product cutting groove, an equipment gathering hopper or groove support (including a cross or triangular frame). The rotating groove connected by the rotating disc is a key component. The spiral plate is made of fiberglass (fiber reinforced coal gangue) and connected together by bolts. The sorting surface of the spiral groove has a pre made durable and wear-resistant layer. He also has the advantages of lightweight, strong, and durable consumables. The head of the rotating groove is equipped with a multi tube feeding homogenizer to sort minerals evenly, which is easy to control. The ore separator is not restricted from being placed on the cross (or tripod) of the support table. The evenly distributed mortar is slowly fed onto the surface of the rotating groove through a feeding groove installed at the end of the spiral groove head, and selected for operation. The tail end of the spiral groove is installed in a valve block type new product selection groove, allowing the sorting equipment to be divided into three types (or four types) of new products along the radial direction according to grade. Change the acquisition width of each new product by adjusting the position of the valve block. The new equipment gathering bucket is a concentric circular tube that converges and leads out the intercepted multiple ore flows. The lateral plane of the spiral concentrator and the change in slope of the curve are particularly suitable for the selection of small particle ore materials. Quotation of Jiangxi Experimental Steel Spiral Chute V. Fiberglass reinforced plastic chutes used in the field can be used to separate fine iron ore, Ilmenite, Chromite, pyrite, tin ore, tantalum niobium ore, placer gold, coal mine, monazite ore, Rutile ore, zircon ore, rare earth ore and other metal and non-metallic mineral materials with sufficient Density contrast. Quotation for Jiangxi Experimental Steel Spiral Chute at