Zirconium titanium sand is an important metal mineral resource widely used in aviation, aerospace, military, electronics, chemical and other fields. In the processing of zirconium titanium sand, rough selection is a very important process, which aims to separate impurities and non-metallic minerals from the raw ore through physical methods to obtain high-purity zirconium titanium sand.
This article will introduce the operating steps and related content of the rough selection test for zirconium titanium sand.
1、 Test equipment
1. Shaker: Used for rough selection experiments, it can perform vibration screening and gravity separation on ores.
2. Magnetic separator: used to remove magnetic impurities from ores.
3. Water washing machine: used to remove sediment and fine particles from ores.
II. Test Steps
1. Sampling: Take a certain number of samples from the raw ore and prepare for the experiment.
2. Rough selection: Place the sample in a shaking table for vibration screening and gravity separation, separating impurities and non-metallic minerals from the ore to obtain high-purity zirconium titanium sand.
3. Magnetic separation: Place the roughly selected zirconium titanium sand into a magnetic separator for magnetic separation to remove magnetic impurities from the ore.
4. Water washing: Place the magnetically separated zirconium titanium sand into a water washing machine for washing to remove sediment and fine particles from the ore.
5. Drying: Put the washed zirconium titanium sand into an oven for drying to achieve a certain degree of dryness.
3、 Test results
Through the rough selection test of zirconium titanium sand, high purity zirconium titanium sand can be obtained, and its quality meets the requirements of relevant standards. At the same time, the experimental results can also provide reference for production and guide the optimization and improvement of production processes.
4、 Precautions
During the testing process, it is necessary to strictly adhere to safety operating procedures to ensure the safety of the testing process.
Before the test, it is necessary to inspect and maintain the testing equipment to ensure its normal operation.
During the testing process, it is necessary to label and record the test samples for the convenience of subsequent data analysis and processing.
In summary, the rough selection test of zirconium titanium sand is one of the important processes in the processing of zirconium titanium sand. Through the test, high-purity zirconium titanium sand can be obtained, providing reference and guidance for production. During the testing process, it is necessary to pay attention to safe operation and equipment maintenance to ensure the accuracy and reliability of the test.
