device

Overview of jet flotation machines.

When the jet flotation machine is working, as the impeller rotates, the slurry in the tank is sucked in from the bottom of the impeller to the impeller blades from all sides. At the same time, the low-pressure air conveyed by the blower also enters it through the air separator and shaft inside the impeller chamber. After the slurry and air of the high-efficiency jet flotation machine are fully mixed between the blades, they are tilted and pushed from the top half of the blades to the surrounding areas, and stably flow through the stator and enter the entire groove in a directional manner. When the foam reaches the stable zone, the foam will overflow from the gravity flow of the overflow weir and enter the foam tank. Another part of the slurry flows into the impeller, which is then stirred and remixed to form mineralized slurry. The remaining slurry flows to the next channel and eventually becomes tailings.

Construction characteristics of high-efficiency jet flotation machine

There is a small part hanging on the side of the rack, which is lightweight and easy to install;

The second impeller is conical, and the stator is radial, with strong stirring force and not easily deformed;

U-shaped trough with low amount of tailings deposition;

The four bladed wheel has a small diameter, low speed circumference, and is silent.

The working characteristics of a new type of tailings jet flotation machine.

1. The energy is very small, which can save 30% -50%;

2. The air dispersion is good, the foam is evenly distributed, and the foam is stable;

3. Solid particles can be completely suspended, not easy to sink, have good slurry gas mixing, and high flotation indicators;

Vulnerable components have light wear and long service life.

Special reminder.

The high-efficiency jet flotation machine is a mechanical stirring type that cannot self suck or self suck pulp. The workshop needs to be arranged in steps (with a drop of 300-400mm);

Applicable to the product.

The new type of tailing jet flotation machine is suitable for the separation of nonferrous metals, Ferrous and non-metallic mineral products, as well as for the roughing and cleaning operations of large and medium-sized flotation plants.